And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.244
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.778
And
I accept adding "cowsay" to Additional Software
4.503
And
Additional Software is correctly configured for package "cowsay"
0.968
And
I shutdown Tails and wait for the computer to power off
6.931
And
I start Tails from USB drive "__internal" with network unplugged
1:8.960
And
I enable persistence
12.804
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
41.663
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.080
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.733
And
I can open the Additional Software configuration window from the notification
2.952
And
I shutdown Tails and wait for the computer to power off
18.830
And
I start Tails from USB drive "__internal" with network unplugged
1:1.768
And
I enable persistence
12.752
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
46.307
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.532
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.220
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.130