And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.865
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.124
And
I accept adding "cowsay" to Additional Software
4.630
And
Additional Software is correctly configured for package "cowsay"
0.892
And
I shutdown Tails and wait for the computer to power off
6.566
And
I start Tails from USB drive "__internal" with network unplugged
1:3.167
And
I enable persistence
12.663
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
40.789
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.069
And
available upgrades have been checked
1.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.779
And
I can open the Additional Software configuration window from the notification
2.930
And
I shutdown Tails and wait for the computer to power off
6.349
And
I start Tails from USB drive "__internal" with network unplugged
1:2.877
And
I enable persistence
13.275
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
40.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.825
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.100
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.144