And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.176
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.873
And
I accept adding "cowsay" to Additional Software
4.635
And
Additional Software is correctly configured for package "cowsay"
1.104
And
I shutdown Tails and wait for the computer to power off
6.725
And
I start Tails from USB drive "__internal" with network unplugged
1:3.937
And
I enable persistence
15.037
And
I configure APT to prefer an old version of cowsay
0.050
And
I disable the tails-virt-notify-user.service user unit
0.159
And
I log in to a new session
49.360
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.970
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.144
And
available upgrades have been checked
1.217
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.135
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
2:2.731
And
I start Tails from USB drive "__internal" with network unplugged
1:14.539
And
I enable persistence
11.391
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
42.249
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.637
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.185
And
the network is plugged
0.152
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101