And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.732
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.593
And
I accept adding "cowsay" to Additional Software
4.541
And
Additional Software is correctly configured for package "cowsay"
1.101
And
I shutdown Tails and wait for the computer to power off
6.298
And
I start Tails from USB drive "__internal" with network unplugged
1:3.763
And
I enable persistence
13.130
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.115
And
I log in to a new session
44.084
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.423
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.085
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.176
And
I can open the Additional Software configuration window from the notification
4.918
And
I shutdown Tails and wait for the computer to power off
15.214
And
I start Tails from USB drive "__internal" with network unplugged
1:5.440
And
I enable persistence
15.325
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
47.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.955
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103