And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.710
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.483
And
I accept adding "cowsay" to Additional Software
3.360
And
Additional Software is correctly configured for package "cowsay"
0.928
And
I shutdown Tails and wait for the computer to power off
6.809
And
I start Tails from USB drive "__internal" with network unplugged
1:5.573
And
I enable persistence
14.609
And
I configure APT to prefer an old version of cowsay
0.049
And
I disable the tails-virt-notify-user.service user unit
0.116
And
I log in to a new session
41.110
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.915
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.621
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.877
And
I can open the Additional Software configuration window from the notification
2.748
And
I shutdown Tails and wait for the computer to power off
2:3.497
And
I start Tails from USB drive "__internal" with network unplugged
1:6.362
And
I enable persistence
15.253
And
I configure APT to prefer an old version of cowsay
0.057
And
I log in to a new session
55.711
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.533
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.088
And
the network is plugged
0.212
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.121