And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.553
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.062
And
I accept adding "cowsay" to Additional Software
6.851
And
Additional Software is correctly configured for package "cowsay"
0.963
And
I shutdown Tails and wait for the computer to power off
6.866
And
I start Tails from USB drive "__internal" with network unplugged
1:0.647
And
I enable persistence
12.803
And
I configure APT to prefer an old version of cowsay
0.052
And
I disable the tails-virt-notify-user.service user unit
0.118
And
I log in to a new session
37.413
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.527
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.088
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.287
And
I can open the Additional Software configuration window from the notification
2.680
And
I shutdown Tails and wait for the computer to power off
12.851
And
I start Tails from USB drive "__internal" with network unplugged
59.943
And
I enable persistence
11.700
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
42.626
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.359
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099