And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.296
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.395
And
I accept adding "cowsay" to Additional Software
4.394
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
6.232
And
I start Tails from USB drive "__internal" with network unplugged
1:1.487
And
I enable persistence
12.167
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
39.585
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.014
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.065
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.824
And
I can open the Additional Software configuration window from the notification
2.374
And
I shutdown Tails and wait for the computer to power off
19.356
And
I start Tails from USB drive "__internal" with network unplugged
1:0.935
And
I enable persistence
12.846
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.858
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.452
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.217
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101