And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.629
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.788
And
I accept adding "cowsay" to Additional Software
6.891
And
Additional Software is correctly configured for package "cowsay"
0.869
And
I shutdown Tails and wait for the computer to power off
6.517
And
I start Tails from USB drive "__internal" with network unplugged
1:0.183
And
I enable persistence
10.894
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
45.449
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.078
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.701
And
I can open the Additional Software configuration window from the notification
2.855
And
I shutdown Tails and wait for the computer to power off
2:3.144
And
I start Tails from USB drive "__internal" with network unplugged
59.252
And
I enable persistence
12.757
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.802
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.624
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092