And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.430
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.865
And
I accept adding "cowsay" to Additional Software
6.970
And
Additional Software is correctly configured for package "cowsay"
0.981
And
I shutdown Tails and wait for the computer to power off
4.745
And
I start Tails from USB drive "__internal" with network unplugged
1:0.546
And
I enable persistence
13.144
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
44.492
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.686
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.072
And
available upgrades have been checked
0.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.592
And
I can open the Additional Software configuration window from the notification
2.925
And
I shutdown Tails and wait for the computer to power off
2:3.311
And
I start Tails from USB drive "__internal" with network unplugged
1:0.057
And
I enable persistence
12.845
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.327
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.813
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104