And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:47.270
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.558
And
I accept adding "cowsay" to Additional Software
6.649
And
Additional Software is correctly configured for package "cowsay"
1.023
And
I shutdown Tails and wait for the computer to power off
6.422
And
I start Tails from USB drive "__internal" with network unplugged
1:0.013
And
I enable persistence
12.708
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
38.121
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.072
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.691
And
I can open the Additional Software configuration window from the notification
3.967
And
I shutdown Tails and wait for the computer to power off
12.849
And
I start Tails from USB drive "__internal" with network unplugged
1:1.478
And
I enable persistence
13.483
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
37.651
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.181
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082