And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.543
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.744
And
I accept adding "cowsay" to Additional Software
4.433
And
Additional Software is correctly configured for package "cowsay"
1.007
And
I shutdown Tails and wait for the computer to power off
6.533
And
I start Tails from USB drive "__internal" with network unplugged
1:0.206
And
I enable persistence
15.761
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
39.828
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.068
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.681
And
I can open the Additional Software configuration window from the notification
2.901
And
I shutdown Tails and wait for the computer to power off
2:6.968
And
I start Tails from USB drive "__internal" with network unplugged
1:1.064
And
I enable persistence
23.767
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
37.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.631
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.211
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115