And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.188
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.717
And
I accept adding "cowsay" to Additional Software
5.484
And
Additional Software is correctly configured for package "cowsay"
0.890
And
I shutdown Tails and wait for the computer to power off
6.667
And
I start Tails from USB drive "__internal" with network unplugged
59.008
And
I enable persistence
12.889
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
36.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.624
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.098
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.199
And
I can open the Additional Software configuration window from the notification
2.213
And
I shutdown Tails and wait for the computer to power off
2:8.258
And
I start Tails from USB drive "__internal" with network unplugged
58.646
And
I enable persistence
14.037
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
40.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.964
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118