And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.865
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.801
And
I accept adding "cowsay" to Additional Software
4.595
And
Additional Software is correctly configured for package "cowsay"
1.224
And
I shutdown Tails and wait for the computer to power off
6.618
And
I start Tails from USB drive "__internal" with network unplugged
1:9.200
And
I enable persistence
20.971
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.125
And
I log in to a new session
54.829
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.928
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.583
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.483
And
I can open the Additional Software configuration window from the notification
3.127
And
I shutdown Tails and wait for the computer to power off
2:7.400
And
I start Tails from USB drive "__internal" with network unplugged
1:6.205
And
I enable persistence
11.737
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
39.737
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.570
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.246
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.132