And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.729
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.206
And
I accept adding "cowsay" to Additional Software
6.960
And
Additional Software is correctly configured for package "cowsay"
1.181
And
I shutdown Tails and wait for the computer to power off
7.149
And
I start Tails from USB drive "__internal" with network unplugged
1:5.572
And
I enable persistence
23.773
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
47.458
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.869
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.094
And
available upgrades have been checked
2.314
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.281
And
I can open the Additional Software configuration window from the notification
2.513
And
I shutdown Tails and wait for the computer to power off
2:4.209
And
I start Tails from USB drive "__internal" with network unplugged
1:3.746
And
I enable persistence
11.971
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
41.608
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.042
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.433
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108