And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.214
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.253
And
I accept adding "cowsay" to Additional Software
5.623
And
Additional Software is correctly configured for package "cowsay"
0.923
And
I shutdown Tails and wait for the computer to power off
4.491
And
I start Tails from USB drive "__internal" with network unplugged
59.157
And
I enable persistence
12.037
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
40.130
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.604
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.078
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.331
And
I can open the Additional Software configuration window from the notification
2.469
And
I shutdown Tails and wait for the computer to power off
2:2.573
And
I start Tails from USB drive "__internal" with network unplugged
1:6.971
And
I enable persistence
10.818
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.197
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.890
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102