And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.600
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.804
And
I accept adding "cowsay" to Additional Software
5.553
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
4.386
And
I start Tails from USB drive "__internal" with network unplugged
58.922
And
I enable persistence
11.844
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
44.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.570
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.063
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.069
And
I can open the Additional Software configuration window from the notification
2.239
And
I shutdown Tails and wait for the computer to power off
13.212
And
I start Tails from USB drive "__internal" with network unplugged
58.744
And
I enable persistence
12.638
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
43.205
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.420
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.141
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103