And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.859
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.722
And
I accept adding "cowsay" to Additional Software
4.339
And
Additional Software is correctly configured for package "cowsay"
1.093
And
I shutdown Tails and wait for the computer to power off
6.485
And
I start Tails from USB drive "__internal" with network unplugged
59.594
And
I enable persistence
13.254
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
39.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.629
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.092
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.075
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.027
And
I can open the Additional Software configuration window from the notification
2.230
And
I shutdown Tails and wait for the computer to power off
2:2.842
And
I start Tails from USB drive "__internal" with network unplugged
59.771
And
I enable persistence
13.994
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.974
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.097
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.379
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111