And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.735
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.390
And
I accept adding "cowsay" to Additional Software
6.607
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
6.263
And
I start Tails from USB drive "__internal" with network unplugged
1:0.176
And
I enable persistence
12.102
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
37.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.071
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.790
And
I can open the Additional Software configuration window from the notification
1.948
And
I shutdown Tails and wait for the computer to power off
17.933
And
I start Tails from USB drive "__internal" with network unplugged
58.827
And
I enable persistence
13.439
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
40.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.462
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112