And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.829
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.783
And
I accept adding "cowsay" to Additional Software
6.565
And
Additional Software is correctly configured for package "cowsay"
0.867
And
I shutdown Tails and wait for the computer to power off
6.453
And
I start Tails from USB drive "__internal" with network unplugged
57.182
And
I enable persistence
10.969
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
37.791
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.645
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.076
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.847
And
I can open the Additional Software configuration window from the notification
2.477
And
I shutdown Tails and wait for the computer to power off
2:7.858
And
I start Tails from USB drive "__internal" with network unplugged
58.422
And
I enable persistence
13.228
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
45.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.864
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099