And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.140
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.160
And
I accept adding "cowsay" to Additional Software
5.434
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
6.392
And
I start Tails from USB drive "__internal" with network unplugged
59.570
And
I enable persistence
16.509
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.142
And
I log in to a new session
37.274
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.459
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.078
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.719
And
I can open the Additional Software configuration window from the notification
3.227
And
I shutdown Tails and wait for the computer to power off
2:8.133
And
I start Tails from USB drive "__internal" with network unplugged
59.128
And
I enable persistence
13.457
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.389
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.687
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110