And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.799
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.063
And
I accept adding "cowsay" to Additional Software
7.225
And
Additional Software is correctly configured for package "cowsay"
0.920
And
I shutdown Tails and wait for the computer to power off
6.428
And
I start Tails from USB drive "__internal" with network unplugged
58.173
And
I enable persistence
13.079
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
37.028
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.074
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.104
And
I prepare the Additional Software upgrade process to fail
0.233
And
the network is plugged
0.260
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.223
And
I can open the Additional Software configuration window from the notification
4.061
And
I shutdown Tails and wait for the computer to power off
13.555
And
I start Tails from USB drive "__internal" with network unplugged
58.317
And
I enable persistence
12.707
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
39.527
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.660
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095