And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.130
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.073
And
I accept adding "cowsay" to Additional Software
4.728
And
Additional Software is correctly configured for package "cowsay"
1.056
And
I shutdown Tails and wait for the computer to power off
6.569
And
I start Tails from USB drive "__internal" with network unplugged
59.951
And
I enable persistence
14.642
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
41.939
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.677
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.082
And
available upgrades have been checked
3.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.201
And
I can open the Additional Software configuration window from the notification
3.527
And
I shutdown Tails and wait for the computer to power off
19.209
And
I start Tails from USB drive "__internal" with network unplugged
59.420
And
I enable persistence
12.439
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
40.379
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.108
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094