And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.735
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.355
And
I accept adding "cowsay" to Additional Software
4.755
And
Additional Software is correctly configured for package "cowsay"
1.022
And
I shutdown Tails and wait for the computer to power off
6.673
And
I start Tails from USB drive "__internal" with network unplugged
1:1.799
And
I enable persistence
13.634
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
40.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.914
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.388
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.581
And
I can open the Additional Software configuration window from the notification
2.703
And
I shutdown Tails and wait for the computer to power off
13.149
And
I start Tails from USB drive "__internal" with network unplugged
59.682
And
I enable persistence
12.764
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
43.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.919
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099