And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.544
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.837
And
I accept adding "cowsay" to Additional Software
7.160
And
Additional Software is correctly configured for package "cowsay"
0.851
And
I shutdown Tails and wait for the computer to power off
6.751
And
I start Tails from USB drive "__internal" with network unplugged
59.499
And
I enable persistence
12.913
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
38.793
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.909
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.074
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.221
And
I can open the Additional Software configuration window from the notification
3.168
And
I shutdown Tails and wait for the computer to power off
2:2.900
And
I start Tails from USB drive "__internal" with network unplugged
59.088
And
I enable persistence
12.599
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
39.478
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.816
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100