And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:57.562
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.893
And
I accept adding "cowsay" to Additional Software
3.443
And
Additional Software is correctly configured for package "cowsay"
1.294
And
I shutdown Tails and wait for the computer to power off
6.622
And
I start Tails from USB drive "__internal" with network unplugged
1:0.773
And
I enable persistence
14.226
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
43.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.953
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.086
And
available upgrades have been checked
0.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
8.053
And
I can open the Additional Software configuration window from the notification
2.936
And
I shutdown Tails and wait for the computer to power off
2:7.710
And
I start Tails from USB drive "__internal" with network unplugged
1:2.692
And
I enable persistence
13.154
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.218
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.895
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.109
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097