And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.993
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.082
And
I accept adding "cowsay" to Additional Software
4.727
And
Additional Software is correctly configured for package "cowsay"
0.957
And
I shutdown Tails and wait for the computer to power off
6.807
And
I start Tails from USB drive "__internal" with network unplugged
1:3.146
And
I enable persistence
13.245
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
42.500
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.275
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.081
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.463
And
I can open the Additional Software configuration window from the notification
2.937
And
I shutdown Tails and wait for the computer to power off
2:3.545
And
I start Tails from USB drive "__internal" with network unplugged
1:0.395
And
I enable persistence
12.376
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.535
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.808
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095