And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:14.331
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.572
And
I accept adding "cowsay" to Additional Software
5.528
And
Additional Software is correctly configured for package "cowsay"
0.916
And
I shutdown Tails and wait for the computer to power off
6.699
And
I start Tails from USB drive "__internal" with network unplugged
57.889
And
I enable persistence
13.145
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
37.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.072
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.309
And
I can open the Additional Software configuration window from the notification
3.294
And
I shutdown Tails and wait for the computer to power off
18.188
And
I start Tails from USB drive "__internal" with network unplugged
58.472
And
I enable persistence
13.699
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
38.861
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.694
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072