And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.479
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.422
And
I accept adding "cowsay" to Additional Software
6.135
And
Additional Software is correctly configured for package "cowsay"
0.973
And
I shutdown Tails and wait for the computer to power off
6.942
And
I start Tails from USB drive "__internal" with network unplugged
1:1.949
And
I enable persistence
15.751
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
43.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.357
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.092
And
available upgrades have been checked
3.484
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.331
And
I can open the Additional Software configuration window from the notification
2.989
And
I shutdown Tails and wait for the computer to power off
2:2.936
And
I start Tails from USB drive "__internal" with network unplugged
1:0.631
And
I enable persistence
18.394
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.595
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.085
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.549
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.262