And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.766
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.060
And
I accept adding "cowsay" to Additional Software
6.811
And
Additional Software is correctly configured for package "cowsay"
1.112
And
I shutdown Tails and wait for the computer to power off
6.801
And
I start Tails from USB drive "__internal" with network unplugged
1:10.252
And
I enable persistence
17.894
And
I configure APT to prefer an old version of cowsay
0.041
And
I disable the tails-virt-notify-user.service user unit
0.127
And
I log in to a new session
46.253
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.821
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.091
And
the network is plugged
0.424
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.811
And
I can open the Additional Software configuration window from the notification
2.293
And
I shutdown Tails and wait for the computer to power off
12.966
And
I start Tails from USB drive "__internal" with network unplugged
1:0.272
And
I enable persistence
13.054
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.547
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.988
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090