And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.133
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.029
And
I accept adding "cowsay" to Additional Software
5.817
And
Additional Software is correctly configured for package "cowsay"
0.871
And
I shutdown Tails and wait for the computer to power off
4.346
And
I start Tails from USB drive "__internal" with network unplugged
57.864
And
I enable persistence
12.579
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
37.293
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.108
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.056
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.951
And
I can open the Additional Software configuration window from the notification
2.574
And
I shutdown Tails and wait for the computer to power off
2:3.233
And
I start Tails from USB drive "__internal" with network unplugged
58.115
And
I enable persistence
13.434
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
44.453
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.884
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091