And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.262
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.006
And
I accept adding "cowsay" to Additional Software
5.725
And
Additional Software is correctly configured for package "cowsay"
0.890
And
I shutdown Tails and wait for the computer to power off
6.478
And
I start Tails from USB drive "__internal" with network unplugged
57.403
And
I enable persistence
12.525
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
42.723
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.961
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.062
And
available upgrades have been checked
1.194
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.870
And
I can open the Additional Software configuration window from the notification
3.165
And
I shutdown Tails and wait for the computer to power off
2:3.460
And
I start Tails from USB drive "__internal" with network unplugged
57.377
And
I enable persistence
13.802
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
35.396
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.647
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074