And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.658
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.453
And
I accept adding "cowsay" to Additional Software
4.306
And
Additional Software is correctly configured for package "cowsay"
1.026
And
I shutdown Tails and wait for the computer to power off
6.591
And
I start Tails from USB drive "__internal" with network unplugged
59.492
And
I enable persistence
16.589
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
40.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.859
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.122
And
available upgrades have been checked
1.262
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.348
And
I can open the Additional Software configuration window from the notification
4.046
And
I shutdown Tails and wait for the computer to power off
13.744
And
I start Tails from USB drive "__internal" with network unplugged
59.862
And
I enable persistence
14.217
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
38.386
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081