And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.079
And
I configure APT to prefer an old version of cowsay
0.055
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.717
And
I accept adding "cowsay" to Additional Software
6.711
And
Additional Software is correctly configured for package "cowsay"
0.991
And
I shutdown Tails and wait for the computer to power off
6.777
And
I start Tails from USB drive "__internal" with network unplugged
1:6.671
And
I enable persistence
14.169
And
I configure APT to prefer an old version of cowsay
0.041
And
I disable the tails-virt-notify-user.service user unit
0.129
And
I log in to a new session
46.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.838
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.103
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.096
And
available upgrades have been checked
0.274
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
11.612
And
I can open the Additional Software configuration window from the notification
3.390
And
I shutdown Tails and wait for the computer to power off
2:7.425
And
I start Tails from USB drive "__internal" with network unplugged
1:3.085
And
I enable persistence
14.685
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
43.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.993
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106