And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.543
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.672
And
I accept adding "cowsay" to Additional Software
6.601
And
Additional Software is correctly configured for package "cowsay"
0.947
And
I shutdown Tails and wait for the computer to power off
6.717
And
I start Tails from USB drive "__internal" with network unplugged
1:4.908
And
I enable persistence
13.735
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
40.523
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.090
And
available upgrades have been checked
3.380
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.713
And
I can open the Additional Software configuration window from the notification
3.063
And
I shutdown Tails and wait for the computer to power off
10.744
And
I start Tails from USB drive "__internal" with network unplugged
1:6.036
And
I enable persistence
16.639
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
35.997
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.536
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098