And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:15.906
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.728
And
I accept adding "cowsay" to Additional Software
5.523
And
Additional Software is correctly configured for package "cowsay"
0.850
And
I shutdown Tails and wait for the computer to power off
4.407
And
I start Tails from USB drive "__internal" with network unplugged
56.516
And
I enable persistence
10.891
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
36.520
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.073
And
available upgrades have been checked
3.558
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.298
And
I can open the Additional Software configuration window from the notification
4.069
And
I shutdown Tails and wait for the computer to power off
6.733
And
I start Tails from USB drive "__internal" with network unplugged
57.788
And
I enable persistence
11.243
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.840
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.141
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072