And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.939
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.332
And
I accept adding "cowsay" to Additional Software
6.716
And
Additional Software is correctly configured for package "cowsay"
0.891
And
I shutdown Tails and wait for the computer to power off
6.430
And
I start Tails from USB drive "__internal" with network unplugged
1:0.562
And
I enable persistence
12.373
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
39.172
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.929
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.075
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.297
And
I can open the Additional Software configuration window from the notification
3.891
And
I shutdown Tails and wait for the computer to power off
18.148
And
I start Tails from USB drive "__internal" with network unplugged
1:0.132
And
I enable persistence
11.460
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.419
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.137