And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.581
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.635
And
I accept adding "cowsay" to Additional Software
6.957
And
Additional Software is correctly configured for package "cowsay"
1.120
And
I shutdown Tails and wait for the computer to power off
4.715
And
I start Tails from USB drive "__internal" with network unplugged
1:6.060
And
I enable persistence
15.054
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
43.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.485
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.086
And
available upgrades have been checked
3.478
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.138
And
I can open the Additional Software configuration window from the notification
3.790
And
I shutdown Tails and wait for the computer to power off
2:8.122
And
I start Tails from USB drive "__internal" with network unplugged
1:11.018
And
I enable persistence
22.255
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
51.979
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.654
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097