And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:48.057
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.852
And
I accept adding "cowsay" to Additional Software
6.696
And
Additional Software is correctly configured for package "cowsay"
0.909
And
I shutdown Tails and wait for the computer to power off
4.507
And
I start Tails from USB drive "__internal" with network unplugged
1:0.977
And
I enable persistence
13.604
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
37.416
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.099
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.453
And
I can open the Additional Software configuration window from the notification
3.730
And
I shutdown Tails and wait for the computer to power off
2:2.077
And
I start Tails from USB drive "__internal" with network unplugged
1:1.975
And
I enable persistence
13.504
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
39.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098