And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.751
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.775
And
I accept adding "cowsay" to Additional Software
6.792
And
Additional Software is correctly configured for package "cowsay"
0.983
And
I shutdown Tails and wait for the computer to power off
6.503
And
I start Tails from USB drive "__internal" with network unplugged
59.586
And
I enable persistence
11.796
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
39.560
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.278
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.093
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
9.146
And
I can open the Additional Software configuration window from the notification
2.746
And
I shutdown Tails and wait for the computer to power off
13.346
And
I start Tails from USB drive "__internal" with network unplugged
1:1.335
And
I enable persistence
10.225
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
39.748
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.015
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.120
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118