And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.694
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.709
And
I accept adding "cowsay" to Additional Software
5.305
And
Additional Software is correctly configured for package "cowsay"
0.915
And
I shutdown Tails and wait for the computer to power off
4.295
And
I start Tails from USB drive "__internal" with network unplugged
1:6.367
And
I enable persistence
11.371
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
38.959
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.066
And
available upgrades have been checked
2.400
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.420
And
I can open the Additional Software configuration window from the notification
2.913
And
I shutdown Tails and wait for the computer to power off
17.912
And
I start Tails from USB drive "__internal" with network unplugged
58.721
And
I enable persistence
10.984
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.134
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.958
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099