And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.237
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.603
And
I accept adding "cowsay" to Additional Software
5.689
And
Additional Software is correctly configured for package "cowsay"
0.917
And
I shutdown Tails and wait for the computer to power off
4.460
And
I start Tails from USB drive "__internal" with network unplugged
1:2.821
And
I enable persistence
14.630
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.125
And
I log in to a new session
32.827
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.486
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.746
And
available upgrades have been checked
0.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.112
And
I can open the Additional Software configuration window from the notification
3.112
And
I shutdown Tails and wait for the computer to power off
2:4.303
And
I start Tails from USB drive "__internal" with network unplugged
1:1.788
And
I enable persistence
12.966
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
37.342
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.086
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082