And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.987
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.613
And
I accept adding "cowsay" to Additional Software
6.804
And
Additional Software is correctly configured for package "cowsay"
0.937
And
I shutdown Tails and wait for the computer to power off
6.503
And
I start Tails from USB drive "__internal" with network unplugged
59.498
And
I enable persistence
12.265
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
30.783
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.968
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.070
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.542
And
I can open the Additional Software configuration window from the notification
3.034
And
I shutdown Tails and wait for the computer to power off
2:7.337
And
I start Tails from USB drive "__internal" with network unplugged
59.323
And
I enable persistence
11.340
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.230
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.207
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104