And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.862
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.659
And
I accept adding "cowsay" to Additional Software
5.743
And
Additional Software is correctly configured for package "cowsay"
0.923
And
I shutdown Tails and wait for the computer to power off
6.108
And
I start Tails from USB drive "__internal" with network unplugged
1:0.408
And
I enable persistence
11.935
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.758
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
40.977
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.084
And
all notifications have disappeared
9.242
And
available upgrades have been checked
0.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.194
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
2:8.222
And
I start Tails from USB drive "__internal" with network unplugged
59.459
And
I enable persistence
12.043
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.561
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.101
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082