And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:11.836
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.232
And
I accept adding "cowsay" to Additional Software
7.457
And
Additional Software is correctly configured for package "cowsay"
0.957
And
I shutdown Tails and wait for the computer to power off
6.306
And
I start Tails from USB drive "__internal" with network unplugged
57.968
And
I enable persistence
9.917
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.651
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.072
And
all notifications have disappeared
9.670
And
available upgrades have been checked
0.182
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.773
And
I can open the Additional Software configuration window from the notification
3.559
And
I shutdown Tails and wait for the computer to power off
12.949
And
I start Tails from USB drive "__internal" with network unplugged
58.691
And
I enable persistence
10.700
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.163
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072