And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.116
And
I configure APT to prefer an old version of cowsay
0.045
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.258
And
I accept adding "cowsay" to Additional Software
6.893
And
Additional Software is correctly configured for package "cowsay"
0.967
And
I shutdown Tails and wait for the computer to power off
6.536
And
I start Tails from USB drive "__internal" with network unplugged
1:0.375
And
I enable persistence
12.488
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.454
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.091
And
the network is plugged
0.076
And
all notifications have disappeared
7.164
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.248
And
I can open the Additional Software configuration window from the notification
3.392
And
I shutdown Tails and wait for the computer to power off
2:7.843
And
I start Tails from USB drive "__internal" with network unplugged
59.835
And
I enable persistence
13.734
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
42.709
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.491
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100