And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.836
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.666
And
I accept adding "cowsay" to Additional Software
5.950
And
Additional Software is correctly configured for package "cowsay"
0.978
And
I shutdown Tails and wait for the computer to power off
6.288
And
I start Tails from USB drive "__internal" with network unplugged
59.283
And
I enable persistence
11.943
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
38.527
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.100
And
all notifications have disappeared
6.208
And
available upgrades have been checked
0.117
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.337
And
I can open the Additional Software configuration window from the notification
3.587
And
I shutdown Tails and wait for the computer to power off
2:4.515
And
I start Tails from USB drive "__internal" with network unplugged
58.853
And
I enable persistence
12.116
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
39.632
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.302
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088