And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.545
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.676
And
I accept adding "cowsay" to Additional Software
6.613
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
6.571
And
I start Tails from USB drive "__internal" with network unplugged
58.938
And
I enable persistence
12.187
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.835
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.068
And
all notifications have disappeared
8.014
And
available upgrades have been checked
0.203
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.176
And
I can open the Additional Software configuration window from the notification
5.118
And
I shutdown Tails and wait for the computer to power off
18.539
And
I start Tails from USB drive "__internal" with network unplugged
1:7.499
And
I enable persistence
12.168
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.993
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094