And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.223
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.960
And
I accept adding "cowsay" to Additional Software
9.580
And
Additional Software is correctly configured for package "cowsay"
1.012
And
I shutdown Tails and wait for the computer to power off
6.453
And
I start Tails from USB drive "__internal" with network unplugged
58.559
And
I enable persistence
13.332
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.844
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.098
And
the network is plugged
0.051
And
all notifications have disappeared
9.989
And
available upgrades have been checked
0.116
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.377
And
I can open the Additional Software configuration window from the notification
6.386
And
I shutdown Tails and wait for the computer to power off
2:4.277
And
I start Tails from USB drive "__internal" with network unplugged
59.885
And
I enable persistence
12.454
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
46.092
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.627
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.125