And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:15.703
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.424
And
I accept adding "cowsay" to Additional Software
5.970
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
6.689
And
I start Tails from USB drive "__internal" with network unplugged
57.338
And
I enable persistence
13.325
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
33.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.460
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.036
And
all notifications have disappeared
8.394
And
available upgrades have been checked
0.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.419
And
I can open the Additional Software configuration window from the notification
3.150
And
I shutdown Tails and wait for the computer to power off
13.089
And
I start Tails from USB drive "__internal" with network unplugged
56.084
And
I enable persistence
10.814
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
37.113
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.883
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084