And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.990
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.724
And
I accept adding "cowsay" to Additional Software
6.790
And
Additional Software is correctly configured for package "cowsay"
0.994
And
I shutdown Tails and wait for the computer to power off
6.289
And
I start Tails from USB drive "__internal" with network unplugged
1:4.772
And
I enable persistence
12.668
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
37.960
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.488
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.032
And
all notifications have disappeared
6.709
And
available upgrades have been checked
0.327
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.969
And
I can open the Additional Software configuration window from the notification
4.683
And
I shutdown Tails and wait for the computer to power off
2:8.258
And
I start Tails from USB drive "__internal" with network unplugged
59.557
And
I enable persistence
16.684
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
42.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087